FAA Part 145 Repair Station 54RR449D AOG 24/7 · 954-806-2994

Valves, pumps & actuation · Component repair & overhaul

Bleed Air Valve, Pump and Actuator Repair.

Approved valve, pump and actuator listings under FAA Part 145 certificate 54RR449D, covering bleed air valves, booster and hydraulic pumps and linear actuators, released on FAA Form 8130-3 for eligible work.

Component test rig used for valve and actuator testing at Sunshine Air Repairs, Plantation, Florida
65approved listings on this page
145FAA repair station 54RR449D
8130-3FAA release for eligible work
24/7direct AOG response

Listings are drawn from the approved capability list current to June 2026. Acceptance of any individual unit still follows incoming evaluation, approved work scope and available technical data. Read the full notice.

Approved listings

Find your part number.

Search the approved valve, pump and actuator listings below, or add a part number straight to an RFQ. If your unit is not on the list, send it anyway and the team will tell you whether it can be quoted or should enter technical evaluation.

Bleed air valves15 listings

  • 3022566Bleed Air Valve
  • 3029174Bleed Air Valve
  • 3075033-01Bleed Air Valve
  • 3011765Bleed Valve
  • 3022095Bleed Valve
  • 3024060Bleed Valve
  • 3100829-01Bleed Valve
  • 3100829-03Bleed Valve
  • 3117032-01Bleed Valve
  • 3123122-01Bleed Valve
  • 3123123-01Bleed Valve
  • 320295-1Bleed Valve
  • 320295-1EBleed Valve
  • 320295-1FBleed Valve
  • 320295-1HBleed Valve

Check and shutoff valves3 listings

  • 2650157Check Valve
  • 26440051Shutoff Valve
  • AV16B1762BValve, Shutoff

Other valves18 listings

  • C6HF1037-1Brake Valve LH
  • C6HF1036-1Brake Valve RH
  • 398648-1-1Electric Temp Control Valve 2 1/2 in
  • 398648-1-2Electric Temp Control Valve 2 1/2 in
  • 398648-2-1Electric Temp Control Valve 2 1/2 in
  • SKA104-1Flap Sector Valve
  • SKA104-3Flap Sector Valve
  • SKA104-3AFlap Sector Valve
  • BYLB51044Temperature Control Valve
  • BYLB51045Temperature Control Valve
  • AV16B1864BValve
  • BYLB9304 SeriesValve Actuator
  • 12040Valve and Gauge
  • 12149Valve and Gauge
  • 12199Valve and Gauge
  • 12056-1Valve and Gauge
  • 12057-1Valve and Gauge
  • 12057-3Valve and Gauge

Booster and transfer pumps3 listings

  • 160-011Booster Pump
  • 160-065Booster Pump
  • RR12830ABooster Pump

Hydraulic and control pumps9 listings

  • C6NF1144-3Control Pump Changer
  • 914-8D27Hand Pump
  • 915-8D27Hand Pump
  • 916-8D27Hand Pump
  • AN6201-1Hand Pump
  • AN6248-2Hand Pump
  • 100-689-4Hydraulic Pump & Motor
  • 100-689-3Hydraulic Pump and Motor
  • 1D2-17Pump

Linear actuators4 listings

  • L10-20Linear Actuator
  • SYLC-51836Linear Actuator
  • SYLC-51836-1Linear Actuator
  • SYLC-51836-10Linear Actuator

Actuators13 listings

  • 71-100-31Nose Landing Gear with Actuator
  • 71-100-33Nose Landing Gear with Actuator
  • 71-190-11BSteering Actuator Assembly
  • 71-190-13Steering Actuator Assembly
  • 71-190-15Steering Actuator Assembly
  • 71-190-7Steering Actuator Assembly
  • 71-200-11BSteering Actuator Assembly
  • 71-200-13Steering Actuator Assembly
  • 71-200-15Steering Actuator Assembly
  • 71-200-7Steering Actuator Assembly
  • C6HF1020-1Wing Flap Actuator
  • C6HF1020-3Wing Flap Actuator
  • C6HF1020-5Wing Flap Actuator

What we actually do

Bench testing is the whole point.

Valves and actuators fail in ways a visual inspection will not show. A bleed air valve that looks serviceable can be out of tolerance at temperature, and a linear actuator that extends on the bench can still stall under load. Neither shows up without the right test setup.

Every unit is tested against the approved data on calibrated equipment, and the findings are recorded before a repair scope is quoted. You get the actual condition, the cost to correct it, and a clear statement of anything outside approved scope.

Before you send it

Valve, pump and actuator questions.

Do you overhaul bleed air valves?

Yes. Bleed air valves are among the approved listings on this page and are repaired and overhauled under FAA Part 145 certificate 54RR449D, with FAA Form 8130-3 release for eligible completed work.

Can you test a linear actuator under load?

Actuators are tested against the approved technical data on calibrated equipment. What that test covers depends on the specific unit and the data available for it, which is confirmed at evaluation.

My valve part number is not listed. Can you still quote it?

Send it. The published list is the approved capability list as amended. Units outside it are reviewed individually and you get a clear answer rather than silence.

Do you repair hydraulic pumps as well as fuel booster pumps?

Both appear in the approved listings. Fuel-specific pumps are also grouped on the fuel system components page if that is closer to what you have.

What paperwork comes back with the unit?

Eligible completed work is released on FAA Form 8130-3, with the teardown findings and the work performed documented. EASA and UK CAA references may be included when the applicable bilateral conditions are satisfied.

Related scope

Sunshine Air Repairs will confirm the repair path and next steps within one business day.

Call AOG 24/7 Send a part number